3047 Evacuated Tube Panel

Evacuated Tube Panel 30 x 47mm Tubes

£670.00

30 tube solar panel - high efficiency 47mm double wall evacuated tube solar collector

Panel dims: 1760 x 2170 x 130mm Weight: 72kgs

Panel Area: 3.38m2 Aperture Area: 2.635m2

Tube Lenth: 1.5m

Width of absorber (internal glass tube): 37mm

Casing Material: Stainless Steel Filling Volume: 1.65ltr

Width of Entry/Exit Pipe: 22mm

Thickness of Collector insulating material: 60mm

Heat Transfer Medium: Water mixed with 40% Glycol antifreeze

The panel is considered to be one of the most cost-effective on the market, and performs extremely well in the UK climate. Its slimline design suits UK architecture, and in most cases, it should be considered 'permitted development' - meaning that you do not need to apply for planning permission if you wish to fit these panels to your roof. The panel has a very low heat capacity, containing only 1 - 1.5litres of water inside the manifold. This allows the panel to heat up quickly when the sun starts to shine, and minimises heat losses at night.

- High efficiency solar collector using heat pipe evacuated tubes

- Can be used in all climates

- Reliable and efficient with twin-wall glass solar tubes

- Copper heat pipes for rapid heat transfer

- Easy plug-in installation for mounting on the roof or at ground level

- Maintenance free

- Suitable for high pressure water (up to 8bar / 116psi)

- Corrosion resistant silver brazed copper header

- Frame material: 304 2B grade stainless steel

- Casing material: 304 BA or AB stainless steel

- Excellent insulator in glass wool

- Collectors may be connected in series to increase water heating capacity

- Tubes easily replaced if broken - can be used with broken tubes

- Ideal for commercial solar water heating applications

- Expected Lifetime >25years

- 'Passive Solar Tracking' - maintains heat output regardless of sun's position in the sky