Wind Turbine Kit 300W

Complete Wind Turbine Kit Including Mini Tower 300W

£395.00

Rated Power: 300W
Max Power: 400W
Output DC Voltage: 12V
Start Wind Speed: 3m/s
Rated Wind Speed: 7m/s
Max Wind Speed: 40m/s
Cut-Out Wind Speed: None
Blade Pitch Control: None, Fixed Pitch
Overspeed Protection: Auto Furl
Gearbox: None, Direct Drive
Temperature Range: -40 to +60°C
Rotor Diameter: 2.50m
Rotor speed: 400rpm
Blades: 3
Blade material: Reinforced fibre glass
Height of tower: 6.0m
Generator: 3 phase permanent magnet alternator
Sine Inverter power output AC 220V, 50HZ
Weight: 123 kg

Packing for shipping

Two Cartons
76x59x30cm-73kgs
202x20x20cm-50kgs

The 300W wind turbine is supplied as a complete kit. The only other things you will need to install this unit are: a set of deep cycle batteries and inverter (which we can supply, if required), a diversion load controller and cement for the foundations.
The following items make up the 300W wind turbine kit:

BOX 1:

3 section tower, labelled upper, middle and lower (each 2m long):

Tail-section including 6 bolts for fin;

3 blades;

3 catenary wire pieces for stays;

6 U bolts to secure catenary wire;

2 round spikes for securing footing;

3 angled pegs to secure catenary wire to ground;

3 turnbuckles with hook and eye ends;


Box2:

Footing for the tower, including pivot bolt;

Wind turbine body including cabling and bolt for tail;

Blade hub with 6 bolts and restraining pieces

Fin;

A nose cone

Rectifier/regulator unit